Description
Flow activated proportional injection for water treatment on the farm
Highlights
Activated by dry contact signal
Operates at set time or speed
Built-in signal repeater
Activate multiple pumps with one meter
Tube replacement without tools
Water Treatment on the Farm Without Additional Equipment
Quality water is proven to contribute to the health & production of livestock & poultry and to the maintenance of the water supply equipment. The Integrator is economical; it doesn’t require an additional water meter dedicated to chemical feed for water treatment. The pump is also offered in 24VDC for installations where standard voltage is unavailable.
The Integrator is an efficient, compact pump with cULus for indoor and outdoor use. The “seconds” operational mode is adjustable to accurately inject a fixed amount of chemical per volume of water determined by the pulse rate of the water meter.
A built-in repeater relay provides a dry contact output signal that replicates the same signal the pump receives. The relay feature is especially useful in livestock or poultry operations where an existing dry contact water meter is being utilized to tally water consumption to a controller. Water consumption, a key indicator for animal health is uninterrupted. The relay feature is also perfect for installations requiring multiple pumps, which can be activated by one dry contact pulse water meter.
Water Treatment Applications
Water and water line disinfection; pH adjustment
Injection of nutrients and supplements into water lines
Oxidation of iron, hydrogen sulfide or manganese
Injection of polyphosphate solutions for corrosion and scale control on plumbing fixtures
Unique Stenner Features
Patented quick release pump head for periodic tube replacement without tools. VIEW VIDEO
Inject common undiluted chemicals without harm to the pump; eliminate daily stock solution maintenance.
Solid one piece pump tube construction.
How It Works
Wire two of the Integrator leads to the water meter, connect another two leads to the house controller, plug the pump into a receptacle and install an injection point in the pipe. The pump is equipped with a safety lockout feature and a standby mode. While in the standby mode the pump is inactive and the relay will continue to register water consumption to the controller when the pump has power applied to it.
The standby mode also allows tube replacement in the pump head without disconnecting power and/or the lead wires. The pump is adjustable from 10% – 100% in 1% increments and is adjusted by a digital keypad with a backlit LCD screen.
